►INSPIRATION: The creative design behind each live edge guitar hanger is based on the musicians I admire in my life that made an impact and inspired me to play the guitar. It’s my token of appreciation for creating great music of my generation. Note*** Guitar in picture not included . Its solely use for descriptive visual purpose only. ►LIVEEDGEWOOD: Each live edge guitar hanger is uniquely hand-crafted and custom designed from weathered-down trees found around metropolitan Phoenix, Arizona. By acquiring these logs, it allows me to create 100% sustainable, re-purposed live edge wood art designs. Locally source and made in North Peoria, Arizona. ►FRACTALART: A process of applying 20,000 volts of electricity to the wood surface recreating a lightning strike in slow motion as well as unique abstract figures, tree and vein like shapes. It is sealed with epoxy inlay ink self-leveling high gloss U.V. resistant formula. ►EPOXYCOLORS: ANGEL WHITE, AQUA MARINE, ARIZONA GOLD, ARMY GREEN, BLACK, CARDINAL METALLIC, CARIBBEAN BLUE, DESERT COPPER, EMERALD METALLIC, GOLDEN YELLOW, GRAY METALLIC, HOT PINK, HUNTER GREEN, ORANGE, PEARL WHITE, PURPLE METALLIC, RED, SKY BLUE, TEAL METALLIC, TURQUOISE BLUE ►OILFINISH: Hand rubbed Old Masters clear satin gel polyurethane and food grade oils to bring out the natural beauty of wooden surfaces. ►GUITARHARDWARE: The new design, known as the “Guitar Keeper”, has a deep cradle design that prevents the guitar from being improperly placed into the hanger. This ultimately provides a safer hanger for your instrument, as the guitar needs to be lifted 2 inches and brought forward to be removed. The pivoting yoke allows for Electric, Acoustic or Bass guitar headstocks to be cradled perfectly while still hanging straight. Made in the USA. ►ENGINEERING: Guihan Guitars researched and tested the use of proper hardware for mounting the String Swing guitar hanger to live edge wood materials. A threaded insert made of carbon steel zinc plated finished goes into predrilled hole and has internal threads. It offers a strong permanent thread to live edge hardwood and mount the guitar hanger yoke. Mounting hardware included with two drywall anchors and two 2-inch Phillips wood screws. ►MOUNTING INSTRUCTIONS: To mount on existing stud walls, drive the screws through pre-drilled pilot holes of hanger into wall using a Phillips screwdriver. If a wall stud is not found, mark the pilot holes on the guitar hanger using a Phillips screwdriver to push and turn the aluminum wall anchor clockwise until flush. Mount the guitar hanger with screws provided through the pilot holes and secure into drywall anchors. ►DIMENSIONS: Height: 15-16 inches Width: 8-10 inches Thickness: 1-1-1/4 inch ►COMPLETIONTIMELINE: Please allow 2-3 weeks to complete from the time order is received. ►DISCLAIMER: It is the sole responsibility of the owner/buyer to properly install the guitar hanger to the wall. GC Creative Works is not responsible for any damages to the musical instrument for any improper installation of the guitar hanger to the wall. GC Creative Works is not affiliated with, or endorsed, sponsored, or supported by any professional musician artists. The names of merely for descriptive purposes onl
